Swivel Mop Use Guide

blackbutton.gif (1393 bytes) blackbutton.gif (1393 bytes) blackbutton.gif (1393 bytes) blackbutton.gif (1393 bytes) blackbutton.gif (1393 bytes)

CONGRATULATIONS!

You have chosen the most comfortable and effective mop handle available on the market today.  Below are some key points to help you become familiar with The Smart Handle Pro™ Swivel Mop's use and proper operation.

Swivel Handle: This top handle grip is made of high impact plastic.  It is designed to swivel in any direction, and can be held in either hand.

Ergonomic Bend: This optimally designed offset gives the user greater control with much less effort.  Also allows for reach around and under objects with less bending and stretching.

Foam Grip: Provides a comfortable hand placement.  Also helps to increase blood flow to the fingers.

Adjustable Shaft: Adjustable per the operator's height requirement.  Also, will increase the reach of the mop to cover large areas almost twice as fast!  With a simple "push of the pins" you can extend or retract the shaft.  Click here to go to the Push Pin Use page.

Quick Flip: An internal swivel has been added to the base of the shaft, to enable the user to quickly flip over the mop head. 

Photo of The Smart Handle Pro™ Swivel Mop with 36oz mop head, not included in purchase of handle.

 


To print the instructions on their own page: Right click the upper left corner of the box below.  Drag your mouse over the entire box.  Click "File", select "Print" and click the "Selection" box in your print screen.  This will print the operating instructions in full, on their own page.

How to operate The Smart Handle Pro Swivel Mop:
Step 1:

Adjust the height of the handle...

a.  by stepping on the mop  

     head to steady the handle.

b.  Raise or lower the handle 

     to the desired height.

Optimal height places the top of the handle at just below the chin.

NOTE: You can lengthen the handle to cover a wider area, but you must then step back from the mop head to maintain comfort and control.
Mopuse1jpg.jpg (8478 bytes)
Step 2:

Stand upright and gently grasp the swivel handle with one hand.

Mopuse2.jpg (11065 bytes)
Step 3:

Place other hand at the foam bend, making sure the bend is facing toward you.

Mopuse3.jpg (17307 bytes)
Step 4:

Maneuver in a side-to-side, figure-eight motion.

How to flip the mop-head over with The Smart Handle Pro Swivel Mop:

QFuse2.jpg (5323 bytes)
Step 1:

At the top of your "figure eight", lift the mop head upwards and bring it toward you.

QFuse4.jpg (6600 bytes)
Step 2:

Place the mop head (now opposite side) back on the ground.

QFuse5.jpg (9290 bytes)
Step 3:

Bring the bend back toward you by rotating the handle 180.

 

QFuse7.jpg (6707 bytes)
Step 4:

Resume figure eight motion.


Delta_Logo_with_Translation.jpg (7767 bytes)

191 South Gulph Road, King of Prussia, PA 19406
Toll Free: 800-435-7338      Toll Free Fax: 800-752-2531